Panasolar Clip

A new powerful and compact tool is very easy to use, even for people with less or even without any technical knowledge. It does not require any computer and also not any external power. You can use it every time every where.

Supported models:

X60, X66, X400, VS2, VS3, VS6, VS7, MX6, MX7, SA6, SA7

How to use it:

Step 1:
Phone must be put in TEST MODE. To do so, press simultaneously * and # and POWER ON keys. Keep the pressed more than 6 seconds. You can see the phone's display changing like on the pictures. Phone is now in TEST MODE.

Step 2:
Connect the cable to the clip and to the phone, then press RUN button on the clip.

Step 3:
The RX led will blink 3 times, then the RX led stays lit for about 4 seconds, then if the unlocking is successful the RX led will blink 10 times. In the same time with the 10 times blinking, the phone's display will blink too. After this, the phone and the clip will shut down by themselves automatically.

Possible errors:
If the RX led blinks 3 times, stay lit 2 seconds, then the RX and TX leds blink fast - this means the phone is not connected or is a communication error.

Package includes:

• X60, X66, X400 models
• S2, VS3, VS6, VS7, MX6, MX7, SA6, SA7
  models

Important information

Step 1:
Phone must be put in TEST MODE. To do so, press simultaneously * and # and POWER ON keys. Keep the pressed more than 6 seconds. You can see the phone's display changing like in the pictures. Phone is now in TEST MODE.

Step 2:
Connect the cable to the clip and to the phone, then press RUN button on the clip.

Step 3:
The RX led will blink 3 times, then the RX led stays lit for about 4 seconds, then if the unlocking is successful the RX led will blink 10 times. In the same time with the 10 times blinking, the phone's display will blink too. After this, the phone and the clip will shut down by themselves automatically.

Possible errors:
If the RX led blinks 3 times, stay lit 2 seconds, then the RX and TX led's blinks fast means the phone is not connected or is a communication error.