Flash and Unlock / Boxes and Dongles / Discontinued Products / NKlip

NKlip

Print version
ID: 5377

NKlip. The revolutionary standalone tool for unlocking all Nokia DCT-3, DCT-4 and WD-2 phones

This product is discontinued.
Please consider the following substitutes:

The revolutionary tool for unlocking all DCT3 DCT4 WD-2 phones in the market! Just put your hands on the NKlip and it works more than your imaginations, no previous knowledge required, no computer needed, no messing for asic type. NKlip is a must have tool for your workshop ideal for small and large quantities to unlock!.

Using same pinout as UFS3 / JTAG / GRIFIN / NBOX / TWISTER /Uni Box/ JAF/ BBOX... and so on , our clip can be used with all those related cables.

All future updates are done via client (which you can download from support area).

Supported phones at this time
Nokia
DCT3: 2100, 3110, 3210, 3310, 3315, 3330, 3350, 3390, 3410, 3610, 5110, 5110i, 5130, 5190, 5210, 5510, 6080, 6110, 6130, 6138, 6150, 6190, 6210, 6250, 7110, 8210, 8250, 8290, 8850, 8855, 8890.

DCT4:
1100, 1110, 1600, 2300, 2600, 2650, 3100, 3108, 3120, 328, 3200, 3220, 3230, 3300, 3510, 3510i, 3650, 3660, 5100, 5140, 6020, 6021, 6030, 6060, 6100, 6101, 6108, 6111, 6170, 6200, 6220, 6230, 6230i, 6260, 6310, 6310i, 6500, 6510, 6600, 6610, 6610i,6620, 6650, 6670, 6800, 6810, 6820, 6822, 7200, 7210, 7250, 7250i, 7260, 7280, 7600, 7700, 7710, 8310, 8800, 8910, 8910i.

DCT-4 WD2:
3600, 3650, 7650, 6600, N-Gage, N-Gage QD, 7610.

TDMA:
1260, 1220, 1261, 3360, 3320, 3361, 3520, 3560

TIKU BT2:
6230, 6230i, 6650, 7260, 7270, 7280

Package Contains

1 NKlip box
1 cable set

LG KG800
Alcatel VLE5
update cable

Important information

A.Unlocking Nokia phone with WSI-NKLIP

Pack 1 Direct unlock

Pack 2 Direct unlock + Full Factory reset

1. Power up the clip (9 to 12V neded)
2. The DCT3 and DCT4 led must be lighted in the same time
3. Insert propper nokia cable in Clip (UFS/Griffin/Tornado/Twister)
4. Power Up the Phone on cable (and wait till phone displays Insert sim card or wrong card)
5a. Press shortly the Switch Button on Clip and you will unlock your phone
5b. Press longer (2sec) he Switch Button on Clip, you will unlock your phone and make a full factory reset to your phone (Carefull! a full factoryreset will erase all data on your phone and set up your security code as 12345)
6. Wait 5-9 seconds ( 5 for DCT4(1101/1600/2600etc) and 9 for DCT3 ) until shows OK LED .
7. If led shows OK then phone unlocked.
8. If OK Led dosen't light then retry from step 4

B.Update Clips

1. put the update cable in clips and in Universal box
2. Press Unlock Button On clips ( and hold it )
3. Power up the clips (Unlock button Pressed)
4. Release unlock button
5. Clips Must have DCT3 led lighted
6. Select correct com port in software and update pack and press Update.
7. Wait about 60 seconds for full update ( until the indicator goes at 100%)
8. Power down the clips. The Clips is ready for unlocking now.
ATENTION: If update fails don't panic. Start the process again.

Categories

Flash and Unlock

Boxes and Dongles