Cyclone P2K Easy Tool for USB-Smart

List of supported Motorola models:

A830, A835, A840, A845, A860, A920, A925, A1000, A1010

C236, C250, C260, C266, C268, C330, C331, C332, C333, C334, C335, C336, C350, C350i, C350L, C350V, C353, C355V, C359V, C370, C380, C381, C385, C390, C450, C450L, C550, C650, C651, C975, C980, C980M-Intel, C980M-Micron

E1 ROKR, E1000, E1000M, E1060, E1120, E370, E375, E378i, E380, E390, E396, E398, E550, E790, E798, E920

L6, L7, U6, M1000

T280, T280i, T720, T720i, T721, T722i, T725e

V3 RAZR, V3i2, V60, V60i, V66, V66i, V70, V80, V150, V151, V180, V186, V188, V190, V220, V226, V300, V303, V330, V360, V360v, V400, V500, V505, V525, V525M, V535, V545, V547, V550, V551, V600, V620, V635, V975, V980, V980M-Intel, V980M-Micron, V1050

Cyclone P2K Easy Tool features:

Direct unlock all Neptune LTE based models, up to 08.0A bootloader.
Bootloader 08.0A and higher via test point.
Direct unlock – all Neptune ULS based models.
Direct unlock – all Neptune LT based models.
Direct unlock – all Neptune LTE2 based models (Motorola V360, V7, U6) using testpoints.
Direct unlock – all Rainbow POG, with Micron and Intel flash chips, without opening up to 0.6.3.1 bootloader version, higher via testpoint.
Lock to network any of supported models.
Backup and restore boot loader and PDS zone.
Flashing 1FF (SHX) original files.
Flashing full backups of binary files.
Flex using original HS files (including file system).
Automatic PDS repair on most models, not need any other write operation, all is made automatically.
Boot loader repair, 0x1DE, 0xDAB and other nasty error messages produced by partial or permanent damage in boot or PDS zone.
Can repair Motorola L6 and U6 killed by other software.

Access to most complete colection of Motorola P2K flash, flex files and service manuals (high level).
There is over 40 GBytes of files in support area.
All update procedure is done by e-mail - no need shipping back dongle to us and spend money on shipping.

Users with BOTH Cyclone activations or Twister Dongle upgraded to USB Smart have following advantage tools for FREE:

USB-SMART PANA DWD TOOL

Work on the following models:
Panasonic X60, X66, X400, VS2, VS3, VS6, VS7, MX6, MX7, SA6, SA7

Currently supported operations are:
Unlock, read codes, Erase SEC, Read EE and Backup

Quanta Calc - Codes calculator for Panasonic A10x, X300, GD55, G5x, G70, Nec 101, 342i, Siemens ST55/60/50

Package Includes:

Important information

1 - download the "Maintenance and Activation Tool for USB-SMART" from here: http://www.gsmserver.com/UsbsmartMaintenance_v43.zip

2 - unzip and extract the file

3 - MAKE SURE NO OTHER DONGLE IS CONNECTED ON USB PORTS ON THE COMPUTER YOU USE TO MAKE UPDATE. ALSO TRY TO CONNECT THE DONGLE DIRECTLY TO COMPUTER USB PORT NOT THROUGH HUB'S

4 - connect the dongle you want to upgrade

5 - run "UsbsmartMaintenance_v10.exe"

6 - if everything is ok the program will start.

7 - Press the "Update Dongle Smartcard" button and PLEASE be patient and wait untill it reaches 100%. At this step some errors may occur. Do not worry. Just disconnect the dongle, close the program. Connect the dongle back, launch the tool and press this button to update again. If error persists, please change the USB port you use.

8 - after successfull connection, you need to read the dongle by pressing the "Read Dongle Settings" button. If it works ok you will see something like this: Dongle base type: USB-SMART (or twister support) Dongle Serial Number: XXXXXXXXX Smartcard UPDATED SAMSUNG feature NOT ACTIVE MOTOROLA feature NOT ACTIVE

9 - Now you choose what you want to update:
a-Twister Support to USB-SMART
b-Request Activation SAMSUNG feature
c-Request Activation MOTOROLA feature
For each activation you need to make a request file !!! If you choose all 3 then you must pay for 3 activations. If only 1 -- then pay for only 1 activation.

10 - send the generated file(s) to your reseller to be activated for you after the payment is made. PLEASE, DO NOT EDIT THOSE FILES !!!

11 - after you receive back the activation file(s), please connect the dongle again and launch the maintenance tool.

12 - Press "Read Dongle Settings" and then press "Process Activation file" button. If it works ok, your dongle will be instantly activated for what you have made the request in step 9.

ALL DONE!

There are two more things to be mentioned in order to prevent missunderstandings:
1 - UPGRADE OF USB SMART TO TWISTER SUPPORT IS NOT POSSIBLE AT THE MOMENT
2 - If you have already activated your dongle with any Cyclone products, save that activation file as you will need that activation while performing "Update Dongle Smartcard" again .