Teltonika WirelessCOM/G10 Controller

Teltonika WirelessCOM/G10 Controlleris a cost-effective wireless solution with RS232 interface for remote management via GSM networks. It is designed for communication with remote devices which have RS232 ports: data loggers, POS terminals, vending machines, PLCs, control panels, various meters, switches, routers and the list goes on.  It is a frequent case when such devices are present in remote locations and there is a need to monitor/control/collect data. In such cases GSM network coupled with GPRS/CSD service can provide a very reliable wireless solution.  Teltonika WirelessCom/G10 is ready-to-go solution for such situations. It acts as a transparent RS232 port. Thus you would be able to see your devices as directly connected to the computer, no matter how far you are from your devices.

Teltonika WirelessCom/G10 has to be simply connected to the remote device via RS232 interface and configured to connect to your server. Whenever some data arrive from your machine to the serial port, WirelessCom/G10 will connect to the configured server and perform data transfer. The connection even allows you to send commands to the remote machine/device from your PC. WirelessCom/G10 will thus transmit all the data coming on its serial port to GPRS and all the data coming from GPRS to the serial port. In short it acts as a bridge between GPRS and the serial port.

In addition to GPRS, you can also use CSD connection and reach the remote devices just by dialing SIM number of the WirelessCom/G10. WirelessCom/G10 also supports SMS bearer. Using SMS you can remotely configure the settings of WirelessCom/G10.  

The device can act as a master to initiate the connection to the server or it can act as a slave and wait for incoming connection.

Features:

• Provides transparent GPRS/CSD connection
• Receive SMS alerts when exceptions occur in device
• No drivers required, hence the device works with any device/computer
• Simple and informative configuration menu
• Configurable through any terminal software
• Device is remotely configurable through GPRS/CSD/SMS
• Access only through authorized phone numbers (for CSD and SMS)
• Auto PIN feature, no need to enter PIN after restart
• Password protected configuration 
• Dual LED indicates various conditions of the device (up to 9 modes).
• Supports various data formats (8N1,8N2,8E1,8O1,7E1,7O1).
• Firmware update option.
• CHAP/PAP authentication supported.
• CE certified.

Specifications:

 * Maximum data speed depends on the services provided by GSM operator.

Package Contents:

• Teltonika WirelessCOM/G10 Controller
• Power Supply
• RS232 cable.
• CD with drivers and User’s Manual.
• Quick Start Guide.