Flash and Unlock
Boxes and Dongles
Advance Turbo Flasher
Advance Turbo Flasher Lighting (ATF Box) Nokia flashing and unlocking software tool
Boxes and Dongles
Advance Turbo Flasher
Advance Turbo Flasher Lighting (ATF Box) Nokia flashing and unlocking software toolAdvance Turbo Flasher Lighting (ATF Box) Nokia flashing and unlocking software tool
|
ID:828075
Weight:0.03kg
Warranty :6 months
|
Advance Turbo Flasher Lighting is a highly professional and time-saving solution for Nokia cell phone servicing. ATF Lighting brings the whole functionality of Advance Turbo Flasher Box. The only difference between ATF Lighting and Advance Turbo Flasher is the redesigned lightweight hardware.
Advance Turbo Flasher Lighting Features
- Flash
- Supports new loaders for SL3 phones:
- New RAPUYAMA loaders with new protocol (2010 loaders)
- Dead USB flashing (for new loader models also)
- Super fast Nokia flashing
- Nokia E52 full flash via Fbus (49 sec)
- Nokia X3 full flash (29 sec)
- Nokia 6500c full flash via Fbus (28 sec)
- Nokia 6700c (48 sec)/Nokia 6120c (52 sec) full flash
- Supports new loaders for SL3 phones:
- Repair
- SL1, SL2, SL3 Super dongle key repair
- SL1, SL2 SIMlock data repair
- Unlock
- SL1, SL2 SIM lock remove via codes
- New Rapido SL3 SIMlock remove. The following versions are supported:
- 5800d (RM-356) - v31.0.008 - v30.0.011 - v31.0.101
- 6790s - 1c (RM-492)
- 6790s - 1b(RM-599)
- E63 (RM-437) - v400.21.013
- E71 (RM-346) - v400.21.013
- N96 (RM-247) - v30.033 - v30.101
- Simlock RPL unlock/relock
Advance Turbo Flasher Lighting Software Features
- High speed turbo flash
- New protocol devices X3, X6, E52, E55, 6700 etc. and all Rapuyama Fbus flash
- Tuning and Maintenance
- Life Timer Tuning (reset/write life time)
- Factory Reset
- Warranty Edit
- Production Data Edit
- Read/write camera configuration
- IMEI and locks
- Safe unlock by means of code calculation (Supports SL1 SL2 and some SL3 models)
- Unlock / Relock using RPL method
- Super Dongle key repair
- PM (Permanent Memory)
- Read/write permanent memory using SX4 Server
- Phone Test (self-test)
Advance Turbo Flasher Lighting Hardware Features
- 480 mbps USB 2.0 Connection
- 100% FPGA based implementation of the Flash BUS protocols
- Adjustable VCCIO Logic Levels (3.30v, 2.80v and 1.80v)
- Compatible with old phone model Logic Level (3.30v)
- Compatible with new phone model Logic Level (2.80v)
- Compatible with future phone model Logic Level (1.80v)
- Proper ESD protection on the FLASHBUS port
- Protects phone damage due to Electro Static Discharge
- Ultra Fast Flash Clock currently up to 15 MHz
- Firmware updatable to support up to 60 MHz without hardware modifications
- Internal VPP Flash Voltage Generator (3.0v, 5.0v, 9.0v and 12.0v)
- Makes faster Flash Erasing on slow phones
- Does not require external power adapters to generate 9.0v and 12.0v
- Uses a Fast Switching SEPIC design
- Hardware upgradable through internal expansion slots
- MicroSD Card slot for future developments
- Dual RJ-4x Ports (RJ-45 and RJ-48) for external communication
- The RJ45 port is the main "Turbo" Bus
- The RJ48 port is the Secondary Bus that can support parallel or serial protocols such as 2Mbps UART, JTAG and Flashing Protocols
- 5 Multicolored LED Indicators:
- Rectangular Orange: FBUS_RX
- Rectangular Green: FBUS_TX
- Circular Blue: USB_POWER / ACP-X_POWER
- Circular Green: VBATT
- Circular Orange: VPP
See Also
JAF/UFS/Cyclone/Universal Box F-Bus cable for Nokia X1-00 (purple)
JAF/UFS/Cyclone/Universal Box F-Bus cable has been developed for Nokia X1-00 flash, unlock, repair and service.
JAF/UFS/Cyclone/Universal Box F-Bus cable has been developed for Nokia X1-00 flash, unlock, repair and service.
Price: 2.4 USD
Medusa Box - Multibrand JTAG Tool
Medusa JTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface.
Medusa JTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface.
Price: 159 USD
Medusa Box Lite - Multibrand JTAG Tool
Medusa JTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface.
Medusa JTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface.
Price: 149 USD
MXBox High Tech Interface
MXBox is a new FBUS interface for MXKey smartcards that allows you to service Nokia cell phones.
MXBox is a new FBUS interface for MXKey smartcards that allows you to service Nokia cell phones.
Price: 24.99 USD
Flash and Unlock
Cell Phone Parts
Repair Equipment
Car Electronics
Parts and Components
Spare parts for GPS Smart Cards and Accessories Game Console Parts and Accessories Camera Replacement Parts Video Camera Replacement Parts eBook Reader Spare Parts IC / Microcontrollers Spare parts for Apple iPad
Miscellaneous



This item is currently not available.

Details







