MASTECH Measurement Equipment
4.5 Digit Autoranging Bench Top Multimeter MASTECH MS8040
Description: 220 mV-1000 V, 220 microA-10 A, 220 Ohm-220 MOhm, 22 nF-220 mF, 220 Hz-220 MHz, -30°~1000°C
AC Voltage detector MASTECH MS8900
Description:- Designed to international safety standard IEC1010-1 CAT III 600V
- Non-contact testing
- Voltage sensitivity: 100 to 240 V AC
- Frequency: 50/60Hz
- Detection distance: < 5”
- Operating temperature: 32°F to 122°F (0°C to 55°C)
Digital Anemometer MASTECH MS6250
Description:Anemometer Mastech MS6250 it’s a wing type device for wind speed, airflow and gas direction speed measuring. Measuring of such kind parameters are urgent for ventilation system engineering and centralized conditioning on manufacturing firms, in such cases anemometers are indispensable. Also anemometers are successfully used for meteorological purposes.
Digital engine tester MASTECH MS6231
Description: Digital engine tester Mastech MS6231 is used for car conditions diagnostic, especially for quality control of connects in electrical circuitry of transport unit.Display illumination is used for reading obtained data in the low visibility conditions.
This tachometer meets with EN61010/IEC1010 CAT II 1000V / CAT III 600V requirements.
Digital Insulation Tester MASTECH MS5201
Description:Digital megger Mastech MS5201 is used to measure insulation resistance in the current-carrying elements of high-voltage power networks. The device meets the requirements of IEC1010-1 CAT III 600V and CAT II 1000V safety standard. The measurement results can be observed on a big LCD with 22 mm high digits and saved by means of the HOLD function. Sound and flash alarm options are applied in the Mastech MS5201 for overload indication. The tester is powered from 6 x AA 1,5 V batteries.
Digital Multimeter Mastech / V&A MS8201H
Description: A device for DC/AC voltage, DC/AC current, resistance, capacitance, inductance, environment temperature, sinusoidal signal frequency measurement and for testing diodes, transistors and continuity.
Digital Multimeter MASTECH M9508
Description: All base functions. Provides high accuracy in wide measuring range. Current overload protection. Limit of effective range by voltage 1000V
Digital Multimeter MASTECH MAS345
Description: Digital Multimeter MASTECH MAS345
Digital Multimeter MASTECH MAS830L
Description: MASTECH MAS830L - economical multimeter with basic function package.
Digital Multimeter MASTECH MAS838
Description: MASTECH MAS838 - economical digital multimeter with basic function package and temperature measurement option
Digital Multimeter MASTECH MS8205C
Description: Digital and analog measurement indication. Enables temperature and capacity measurement. Auto ranging. Electronic overload protection.
Digital Multimeter MASTECH MS8205F
Description: High precision of measurements. Measurement frequency and capacity function. Auto ranging. Terminals for probes have mechanical protection from error connection.
Digital Multimeter MASTECH MS8209
Description: Multifunctional. Relative measurement mode (REL). Measurement of pulse ratio, luminance, sound volume, humidity, temperature. Digit capacity - 3999
Digital Multimeter MASTECH MS8211D
Description:- Current overload protection.
- Handy and reliable pen type tool
- Peak value recording function
- Auto/manual ranging
- Meets IEC1010-1 safety requirements.
- Short circuit protection.
Digital Multimeter MASTECH MS8216
Description: Precise measurement results, auto ranging, wide limit of effective rangeWeight: 0.145 kg
Digital Multimeter MASTECH MS8217
Description: Wide temperature range. Pulse ratio, temperature, capacity and frequency measuring. Digit capacity - 3999. Illumination. Automatic power off.
Digital Multimeter MASTECH MS8218
Description: High-accuracy and multifunctional. PC - interface RS 232C. Root-mean-square measuring. (True RMS). Digital display with 50-segmented analog scale. Digit capacity - 50000. Automatic calibration via software.
Digital Multimeter MASTECH MS8221A
Description: Economical class device. Exact measurement accuracy with improved frequency characteristics
Digital Multimeter MASTECH MS8221C
Description: Capacity and temperature measurement. Display illumination. Digit capacity - 1999. Overload indication "1". Automatic shutdown function
Digital Multimeter MASTECH MS8222G
Description: All standard functions and temperature, capacity and frequency measurement. 40-segmental graphic scale. Automatic power-off
Digital Multimeter MASTECH MS8222H
Description: Large function package. 2000 counts. TTL tester. Induction, capacity and frequency maesuring. Illumination. Automatic shutdown.
Digital Multimeter MASTECH MS8226
Description: High-accuracy and multifunctional. Measurement of temperature, pulse ratio , frequency and capacity. Relative measurement mode (REL). Software and PC interface. Overload indication. Illumination. Automatic shutdown.
Digital Multimeter MASTECH MS8264
Description: Capacity, temperature and frequency measurement. Digit capacity - 1999. Self-repair safety device
Digital Multimeter MASTECH MS8265
Description:Large five-digits LCD of digital multimeter Mastech MS8265 distinguishes this measuring device from the other similar tools. The multimeter ensures high measurement accuracy, minimal inaccuracy and conforms to the IEC1010-1 standard CAT III 600V and CAT II 1000V. By means of digital multimeter Mastech MS8265 one can test diodes and identify wires.
Digital Multimeter MASTECH MS8268
Description: High-precision measurement. Digit capacity - 3999. Relative measurement mode (REL). Automatic power off. Self-repair safety device
Digital multimeter MASTECH MY64
Description: FEATURES• 32 Ranges
• Large LCD Display
• Auto power off
• DC voltage: 200m/2/20/200V±0.5%, 1000V±0.8%
• AC voltage: 2/20/200V±0.8%, 700V±1.2%
• DC current: 2m/20mA±0.8%, 200mA±1.5%, 10A±2.0%
• AC current: 2m/20mA±1.0%, 200mA±1.8%, 10A±3.0%
• Resistance: 200/2k/20k/200k/2M?±0.8%, 20M?±1.0%, 200M?±5.0%
• Capacitance: 2n/20n/200n/2µ/20µF±4.0%
• Frequency: 20kHz±1.5%
• Temperature: -20°C ~ 1000°C
• Continuity checking with buzzer
• Diode check: Test current 1.0mA, test voltage 2.8V
• Power: 6F22 (9V) x 1
• hFE: 1 ~ 1000
• Display: 30mm x 60mm LCD
• Size: 91mm x 189mm x 31.5mm
Weight: 0.72 kg
Digital Multimeter MASTECH MY65
Description: Resolution 4 ½ digits LCD. Capacitance and frequency measurment. High input resistance doesn't break measuring of parameters.
Digital Multimeter MASTECH MY68
Description:
Digital Sound Level Meter MASTECH MS6700
Description:Maximal values measurement of frequency range and sound volume. Display backlight and time/date indication.
Digital Sound Level Meter MASTECH MS6701
Description:Digital display, measurement of frequency range and soubd volume maximal values, backlight, date/time indication, interface for PC.
Digital/Analogue Insulation Tester MASTECH MS5202
Description:Digital/analogue megger Mastech MS5202 is used to measure insulation resistance in the current-carrying elements of high-voltage power networks. The device meets the requirements of IEC1010-1 CAT II 5000V standard. The measurement results are shown by means of a big pointer indicator with a mirror scale meant for increasing of measurement accuracy. The digital display shows output voltage. Since the insulation resistance testing requires high voltage (up to 2,5 kV), the Mastech MS5202 uses a double confirmation system for test setup and control over operation. The case of Digital/Analogue Insulation Tester MASTECH MS5202 is dampproof. The tester is powered from 8 x AA 1,5 V batteries and 1 x 6F22 9 V battery.
Frequency Counter 110 V MASTECH MS6100
Description: Frequency counter MASTECH MS6100 is an intelligent multi function device powered from 110 V mains.Input voltage: 110 V
Infrared Thermometer MASTECH MS6530
Description: FEATURES:• Automatic range
• Wide temperature measurement
• Double digital LCD display
• MAX, MIN, MAX-MIN, average value selectable
• Back light
• Circular twelve dots laser targeting
• °C/°F display selection
• Hold function
• Low battery indication
• Auto power off
• Measurement range: -20°C ~ 537°C (-4°F ~ 999°F)
• Emissirity: 0.95
• Field of view: 12 : 1
• Resolution: 0.1°C
• Display: Back light LCD display
• Auto power off: 10 Seconds
Weight: 0.7 kg
Infrared Thermometer MASTECH MS6530A
Description: Infrared Thermometer MASTECH MS6530A
Infrared Thermometer MASTECH MS6540B
Description: Infrared Thermometer MASTECH MS6540B
Line tracker MASTECH MS6812
Description: The cable tracker is designed to identify and trace wires or cables within a group without damaging the insulation. For telephone line, it can identify some state in the line, and more convenience to install. Debug, maintain telephone line. There is a Sender (MS6812-T) and a Receiver (MS6812-R) included in the cable tracker.
Mastech B3801 Instrument Bag
Description: Convenient multi-tool carrying bag.Size: 390 x 295 x 80 mm
Mastech MS2101 AC/DC Digital Clamp Meter
Description:SPECIFICATIONS
| Max. LCD display | 3999 |
| Range selection | manual |
| DC voltage | 0,4/4/40/400 V ± 0.8%, 1000 V ± 1,0% |
| AC voltage | 4/40/400 V ± 1,0%, 700 V ± 1,2% |
| DC current | 400/1000 A ± 3,0% |
| AC current | 400/1000 A ± 3,0% |
| Resistance | 400/4k/40k/400k/4 MOm ± 1,0%, 40 MOm ± 2,0% |
| Capacitance | 4n/40n/400n/4 µF ± 4,0% |
| Frequency range | 40 Hz -100 kHz ± 2,0% |
| Temperature | -40 °C -750 °C ± 1,0% |
| Duty cycle | 0,1% - 99,9% |
| Diode test | yes |
| Continuity test | yes |
| Data hold | yes |
| Dimensions | 250x99x43 mm |
| Power | 9V 6F22 battery |
| Weight | 480g |
| Manufacturer | Mastech |
Weight: 1.4 kg
MASTECH MS5300 AUTORANGE RLC METER
Description: 200mm x 100mm x 40mm; Resistance: 600&Omega-60MΩ Capacitance: 6nF-6mF; Inductance: 600μH-60H
Mastech MS6610 Digital Luxmeter
Description:Mastech MS6610 Digital Luxmeter - compact and reliable device. Separate design of photo detector and the luxmeter itself makes the measurements moreconvenient.
Specifications and Features:
MASTECH MS8050 Professional high-accuracy digital multimeter
Description: AC/DC root-mean-square measurement. PC interface. Display counts - 53000. Software automatic calibration. High sensitivity. Storage of 30 measurements.
Mastech MS8200G Digital Multimeter
Description:Mastech MS8200G Digital Multimeter offers the ability to measure DC and AC current, DC and AC voltage, resistance, condenser capacitance, temperature of wide ranges as well as to test transistor hFE and sygnal frequency in sound range. Mastech Digital Multimeter also allows to test semiconductor diodes and troubleshoot wiring; the obtained results are displayed on a large 31/2 LCD and can be recorded by means of DATA HOLD function. LCD back light is very helpful for operations in underlighting conditions. The multimeter is powered by a 9 V battery.
Mastech MS8200G Digital Multimeter designed to international safety standard IEC 1010-1 CAT II 1000V. The package contains probe set and user manual in several languages.
MASTECH MS8220R Digital Multimeter
Description: High-precision and multifunctional. Automatic and manual ranging. Counts-5999. Temperature, capacity and frequency measuring in the range from 600 Hz to 60 MHz. Automatic power off.
Mastech MS8221B Manual Range Digital Multimeter
Description:Mastech MS8221B Manual Range Digital Multimeter offers the ability to measure temperature, DC current, DC and AC voltage, frequency and resistance as well as to test transistor hFE. The multimeter has a large 31/2 LCD with maximum displayed value 1999. Mastech MS8221B Manual Range Digital Multimeter allows to test semiconductor diodes and troubleshoot wiring; the results can be recorded by means of DATA HOLD function. In comparison with the other models, the measurement ranges in this device are narrowed and AC current measurement is not available.
Mastech MS8221B Manual Range Digital Multimeter designed to international safety standard IEC 1010-1 CAT III 600V, CAT II 1000V. The package contains probe set and user manual in several languages.
MASTECH MS8221D Digital Multimeter
Description:Mastech MS8221D allows to measure AC and DC current, AC and DC voltage and resistance. Measurement range is manually selected by means of rotary switch. The meter has a big 3½ 1999 counts LCD with blue back light and DATA HOLD function for measurement result storage. The MS8221D is used for testing semiconductor diodes and checking line continuity; besides, 50 Hz signal generator enables testing of operational efficiency of wireless devices. The device automatically powers off after the certain period following the last measurement. The package contains a set of multimeter test leads.
MASTECH MS8229 5-in-1 Autorange Digital Multimeter With Alarm
Description:Mastech MS8229 is a unique 5-in-1 digital multimeter with specially designed features that no other meter can offer. Besides usual multimeter functions (i.e. measurements of AC and DC current, AC and DC voltage and resistance), MS8229 is used for measuring temperature, humidity, light and sound levels. The device meets the IEC1010-1 CATII 1000V / CATIII 600V. Mastech MS8229 provides both automatic and manual measurement range selection. The meter has a big 3¾ 3999 counts LCD with blue back light. DATA HOLD function for measurement result storage. Mastech MS8229 digital multimeter can test semiconductor diodes and check line continuity. The device automatically powers off after the certain period following the last measurement.
MS2138 AC/DC DIGITAL CLAMP METER
Description: 225mm x 86mm x 33mm, ,max Ø cunductor 42mm, 4-400V, 400-1000A, 400Ω-4MΩ 40Hz to 100kHzWeight: 0.65 kg
Multimeter Test Leads MASTECH T3000
Description:Test Leads MASTECH T3000 compatible with various series of MASTECH multimeters: MY60 series, M92 series,MS8200 series, MS8205 series, M9805 series, MS8222 series, MS8201 series, M266 series. MS2000 series, MS2001 series, M9912, MS5201, M89 series, MS2201, MS2203, MS6230.
- Lenth (including handpiece): 100 cm
- Protective caps for probe needles and jacks
Multimeter Test Leads MASTECH T3003
Description:Test Leads MASTECH T3003 compatible with various models of MASTECH multimeters: M830, M831, M832, M833, M838, M1015B.
- Lenth (including handpiece): 83 cm
- Protective caps for probe needles
Multimeter Test Leads MASTECH T3009
Description:Test Leads MASTECH T3009 compatible with various models and series of MASTECH multimeters: MS7212, MS8050, MS8218, MS8203, MS8217, MS8215, MS8220 series, MS8226 series, MS8209, MS2102, MS2101, MS2138 series, MS2026 series, MS8213 series.
- Lenth (including handpiece): 119,5 cm
- Protective caps for probe needles and jacks
Boxes and Dongles
English
Currency
