- 2 Channels,Full Bandwidth 6 MHz
- 250MSa/s Realtime Sampling Rate, 25GSa/s ET Sampling Rate
- 4k Memory Length Per Channel
- Peak Detect as Fast as 5.8 ns
- Save/Recall of 15 Front Panel Settings & Waveforms
- "A+" Class 5.6" TFT Color Display
- SD Card & USB Device Supported
- 6-Digit Realtime Frequency Counter
- Multiple-language user interface
EASY TO USE
 |
|
SD Card & USB Device supported A total of 17 waveforms could be saved into the internal memory for later recall and display,
and 2 saved reference waveforms plus 2 live waveforms could be shown on the screen at the same time for comparison.
SD card mass storage and USB device port are supported, providing storage/transfer of measurement data and remote control for diversified solutions. |
|
SPECIFICATION OF INSTEK GDS-1062
| Model |
GDS-1022 |
|
GDS-1062 |
|
| Bandwidth |
DC |
25 MHz |
40 MHz |
60 MHz |
100 MHz |
AC |
10Hz ~ 25MHz |
10Hz ~ 40MHz |
10Hz ~ 60MHz |
10Hz ~ 100MHz |
| Real-time Sample Rate |
250 MSa/s |
| Equivalent Sample Rate |
25 GSa/s |
| Memory Depth |
4K points per channel |
| refresh rate |
1000wfms/s |
| Rise Time |
< 14 ns |
< 8.75 ns |
< 5.8 ns |
< 3.5 ns |
| Input Impedance |
1 MΩ±2% || 16 pF |
| Time Base Range |
1 ns/div to 10 s/div 1•2•5 increment |
| Dimensions |
310(W) × 142(H) × 140(D)mm |
| Display |
"A+" Class 5.6" TFT Color Display
Without any defect Pixel |
SOFTWARE / FIRMWARE INSTEK GDS-1000 SEREIS
|
|
 |
LabView Driver |
PC Software |
USB Driver for GDS-1102/1062/1042/1022 |
COMMON PARAMETERS FOR INSTEK GDS-1000 SEREIS
| VERTICAL |
Channels |
2 |
| Bandwidth |
DC ~ 60MHz (-3dB) |
| Rise Time |
< 5.8 ns Approx. |
| Sensitivity |
2mV/div ~ 5V/div (1-2-5 increments) |
Accuracy
|
±(3% x |Readout|+0.1 div + 1mV) |
| Input Coupling |
AC, DC & Ground |
Input Impedance
|
1M±2%, ~16pF |
| Polarity |
Normal & Invert |
Maximum Input
|
300V (DC+AC peak), CATII |
| Waveform Signal Process |
+ , - , FFT |
Offset Range
|
2mV/div ~ 50mV/div : ±0.4V
100mV/div ~ 500mV/div : ±4V
1V/div ~ 5V/div : ±40V |
| Bandwidth Limit |
20MHz (-3dB) |
| TRIGGER |
Sources |
CH1 , CH2 , Line , EXT |
Modes
|
Auto, Normal, Single, TV, Edge, Pulse Width |
| Coupling |
AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity |
DC ~ 25MHz : Approx. 0.5div or 5mV |
| EXT
TRIGGER |
Range |
±15V |
| Sensitivity |
DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV |
| Input Impedance |
1MO©±2% , ~ 16pF |
| Maximum Input |
300V (DC AC peak) , CATII |
| HORIZONTAL |
Range |
1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div
~ 10s/div |
| Modes |
Main, Window, Window Zoom, Roll, X-Y |
| Accuracy |
±0.01% |
| Pre-Trigger |
10 div maximum |
| Post-Trigger |
1000 div |
| X-Y
MODE |
X-Axis Input |
Channel 1 |
Y-Axis Input
|
Channel 2 |
| Phase Shift |
±3B° at 100kHz |
| SIGNAL
ACQUISITION |
Real-Time Sample Rate |
250MSa/s maximum |
| Equivalent Sample Rate |
25GSa/s maximum |
| Vertical Resolution |
8 Bits |
| Record Length |
4K Dots maximum |
Acquisition Mode
|
Normal, Peak Detect, Average |
Peak Detection
|
10ns (500ns/div ~ 10s/div) |
Average
|
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
| CURSORS
AND MEASUREMENT |
Voltage Measurement |
Vpp , Vamp , V avg , Vrms , Vhi , Vlo
, Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot |
| Time Measurement |
Freq , Period , Rise Time , Fall Time , Positive Width
, Negative Width , Duty Cycle |
| Cursors Measurement |
Voltage difference between cursors (O”V)
Time difference
between cursors (O”T) |
Auto Counter
|
Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the Video trigger mode |
| CONTROL PANEL
FUNCTION |
Autoset |
Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger
level |
| Save Setup |
Up to 15 sets of measurement conditions |
Save Waveform
|
15 sets of waveform |
| DISPLAY |
TFT LCD Type |
5.6 inch |
Display Resolution
|
234 (Vertically) × 320 (Horizontally) Dots |
Display Graticule
|
8 × 10 divisions |
Display Brightness
|
Adjustable |
| INTERFACE |
USB Slave Connector |
USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) |
| SD Card Slot |
Image (BMP), waveform data (CSV), and setup (SET) |
| POWER SOURCE |
Line Voltage Range
|
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
| MISCELLANEOUS |
Multi-Language Menu |
Available |
| Online Help |
Available |
STANDARD ACCESSORIES OF INSTEK GDS-1000 SEREIS
|
|
|
Power Cord
|
GTP-060A-2 Probe(10:1/1:1) × 2
|
User Manual |
|
Buy now
Boxes and Dongles
English
