Measuring Equipment
4.5 Digit Autoranging Bench Top Multimeter MASTECH MS8040
Description: 220 mV-1000 V, 220 microA-10 A, 220 Ohm-220 MOhm, 22 nF-220 mF, 220 Hz-220 MHz, -30°~1000°C
AC Voltage detector MASTECH MS8900
Description:- Designed to international safety standard IEC1010-1 CAT III 600V
- Non-contact testing
- Voltage sensitivity: 100 to 240 V AC
- Frequency: 50/60Hz
- Detection distance: < 5”
- Operating temperature: 32°F to 122°F (0°C to 55°C)
Anemometer Proskit MT-4005
Description: Airflow measurements in heating, ventilation, and air conditioning systems, air duct analysis, monitoring or process air.
ATTEN ADS1022C Digital Oscilloscope
Description:We are glad to present you the new osciloscope from ATTEN - ADS1022C. This model is produced on the same platform as the WaveAce oscilloscopes from world-known manufacturer - the LeCroy.
ATTEN ADS1022C meets all the requirements of the modern budget oscilloscopes.
ATTEN ADS1022C is a 2-channel oscilloscope with the bandwidth of 25MHz, sampling frequency of 500 Ms/s and internal memory of up to 4 K.
32 built-in automatic measurement functions, such as signal time gaps measurement, phase measurements etc. Also it enables user to understand and analyze input waveforms. Additional functions of access control, user-defined digital filters and more make calibration process much easier for user.
User-friendly interface. 11 different menu languages.
Available in Hong Kong, European stocksWeight: 6.5 kgSuggest your price | Price: USD 299
Atten ADS2202CA, Digital Oscilloscope
Description:ATTEN ADS2202CA digital oscilloscope is a powerfool tool for setting up and testing of circuits and waveform logical connections.
Bandwidth of 200 MHz and Samplig rate of 1 GS/s are the guarantees of flawless display of high frequency, complex and single waveforms.
ATTEN ADS2202CA meets all the requirements to be a modern budget oscilloscope. 32 built-in automatic measurement functions, such as waveform timegap measurement, waveform phases etc. allow uuser to understand and analyse incoming waveforms. Additional functions include function of access control, user-definre digital filters and more allow faster and easier calibration of various radio devices.
User-friendly interface. Support of 11 languages.
Built-in USB-host allows connecting external data storage devices. USB-slot on the rear panel allows direct connection of the printer. EasyScope Computer Software System allows remote control through the virtual panel and presents easy way of caving waveform data as arrays or images.
Auto-ranging Digital Multimeter ProsKit MT-1260
Description: Capacity, temperature and frequency measuring. Digits - 3999. Auto/manual ranging. Auto switching off function.
AXIOMET AX-1359CR Temperature and Humidity Meter
Description: The AX-1359CR digital meter is designed for measuring relative humidity and air temperature.- Capacitive sensor placed in protective housing
- HOLD function (stops display?s indications)
- Displays temperature in °C or °F
- Battery indication
- Standard equipment: soft protective cover
Weight: 0.25 kg
AXIOMET AX-503 Multimeter - SMD Measuring Tweezer
Description:- Low battery indicator
- Diode test
- Measures resistance and capacitance
- Relative measurement function
- Auto power off
Weight: 0.25 kg
AXIOMET AX-6520, Infra-Red Thermometer with Laser Sighting and Backlit Display
Description:
AXIOMET AX-7205 Miniature Clamp Meter (up to 400 A AC)
Description: A miniature clamp meter for measuring AC current up to 400 A with 0,01 A resolution. The meter measures AC current and voltage within the bandwidth 40...400 Hz. Temperature and resistance measurement.
AXIOMET AX-9201 Digital Thermometer with Probe 250 mm
Description:Applications
- Air conditioning
- Food & catering
- Agriculture
- Petrocarbones
- Automobile
- Photography
- Refrigeration
- Pharmaceuticals
- Process control
- Laboratory
- Heating & ventilation
- Energy management
- Green house
Weight: 0.1 kg
AXIOMET AX-9313 Miniature Digital Thermometer with Probe 123 mm
Description:Applications
- Air conditioning
- Food & catering
- Agriculture
- Petrocarbones
- Automobile
- Photography
- Refrigeration
- Pharmaieutical
- Process control
- Laboratory
- Heating & ventilation
- Energy management
- Green house
Weight: 0.1 kg
CB-H digital pocket scale
Description: Digital pocket scale for measuring weight of objects and tare up to 500g with resolution 0,01gWeight: 0.63 kg
CS-50-II digital pocket scale
Description: Digital pocket scale for measuring weight of objects and tare up to 300g with 0.05 accuracy.Weight: 0.3 kg
CS-50-II digital pocket scale
Description: Digital pocket scale for measuring weight of objects and tare up to 100g with 0.01g accuracy.
CS-53-II digital pocket scale
Description: Digital pocket scale for measuring weight of objects and tare up to 200g with 0.01g accuracy.Weight: 0.3 kg
CS-55 Digital Pocket Scales
Description: Digital pocket scale for measuring weight of objects and tare up to 300g with 0.05 accuracy.
CS-81 Digital Pocket Scales
Description: Digital pocket scale for measuring weight of objects and up to 300g with 0.01g accuracy.Weight: 0.3 kg
CS-E digital pocket scale
Description: Digital pocket scale for measuring weight of objects up to 100g and 0.01g accuracy.
CS-F digital pocket scale
Description: Digital pocket scale for measuring weight of objects up to 500g and 0.1g accuracy.
Digital Anemometer MASTECH MS6250
Description:Anemometer Mastech MS6250 it’s a wing type device for wind speed, airflow and gas direction speed measuring. Measuring of such kind parameters are urgent for ventilation system engineering and centralized conditioning on manufacturing firms, in such cases anemometers are indispensable. Also anemometers are successfully used for meteorological purposes.
Digital Angle Meter with spirit level CAPITAL DA-101
Description: Working range angel: 0 - 185°. Accuracy: ±0.1°. Contain horizontal and vertical spirit levels. Field of application - woodwork, ground work, repairing, building and others.Weight: 0.45 kg
Digital Battery Analyzer ADS (new version)
Description:The Mobile Phone Battery Analyzer is designed to analyze a mobile phone battery pack in such a short time that any customer can be satisfied with the proof he can get from a shopkeeper without wasting a minute of his time, and if he still wishes to know more about the battery pack, he could simply take a cup of coffee in a nearby cafe' and come back to learn everything he wants to know. It is a very convenience equipment for testing all kinds and shapes of cellular phone's battery, two polarity contact pins of battery tester can be vertical and horizontal free direction adjusted to fit any shape of battery, no more many different type battery adapter for testing many different shape of batteries. just put the battery in the battery cartridge, and this battery tester / analyzer can run quick test for inspecting the battery's quality and performance just in 15 seconds, you can also run rapid full testing (requires 2 - 3 hours) or standard full testing (requires 4 - 8 hours) for checking out the over charging protection, over discharging protection, Capacity, charging time and discharging time of your battery pack, you may also print the inspection report of battery by connecting this battery tester to your computer with appropriate COM port cable. This universal battery tester/analyzer is a great testing equipment for fleet battery users, cell phone dealers and battery sale's centers.
Digital engine tester MASTECH MS6231
Description: Digital engine tester Mastech MS6231 is used for car conditions diagnostic, especially for quality control of connects in electrical circuitry of transport unit.Display illumination is used for reading obtained data in the low visibility conditions.
This tachometer meets with EN61010/IEC1010 CAT II 1000V / CAT III 600V requirements.
Digital Insulation Tester MASTECH MS5201
Description:Digital megger Mastech MS5201 is used to measure insulation resistance in the current-carrying elements of high-voltage power networks. The device meets the requirements of IEC1010-1 CAT III 600V and CAT II 1000V safety standard. The measurement results can be observed on a big LCD with 22 mm high digits and saved by means of the HOLD function. Sound and flash alarm options are applied in the Mastech MS5201 for overload indication. The tester is powered from 6 x AA 1,5 V batteries.
Digital Multimeter Mastech / V&A MS8201H
Description: A device for DC/AC voltage, DC/AC current, resistance, capacitance, inductance, environment temperature, sinusoidal signal frequency measurement and for testing diodes, transistors and continuity.
Digital Multimeter MASTECH M9508
Description: All base functions. Provides high accuracy in wide measuring range. Current overload protection. Limit of effective range by voltage 1000V
Digital Multimeter MASTECH MAS345
Description: Digital Multimeter MASTECH MAS345
Digital Multimeter MASTECH MAS830L
Description: MASTECH MAS830L - economical multimeter with basic function package.
Digital Multimeter MASTECH MAS838
Description: MASTECH MAS838 - economical digital multimeter with basic function package and temperature measurement option
Digital Multimeter MASTECH MS8205C
Description: Digital and analog measurement indication. Enables temperature and capacity measurement. Auto ranging. Electronic overload protection.
Digital Multimeter MASTECH MS8205F
Description: High precision of measurements. Measurement frequency and capacity function. Auto ranging. Terminals for probes have mechanical protection from error connection.
Digital Multimeter MASTECH MS8209
Description: Multifunctional. Relative measurement mode (REL). Measurement of pulse ratio, luminance, sound volume, humidity, temperature. Digit capacity - 3999
Digital Multimeter MASTECH MS8211D
Description:- Current overload protection.
- Handy and reliable pen type tool
- Peak value recording function
- Auto/manual ranging
- Meets IEC1010-1 safety requirements.
- Short circuit protection.
Digital Multimeter MASTECH MS8216
Description: Precise measurement results, auto ranging, wide limit of effective rangeWeight: 0.145 kg
Digital Multimeter MASTECH MS8217
Description: Wide temperature range. Pulse ratio, temperature, capacity and frequency measuring. Digit capacity - 3999. Illumination. Automatic power off.
Digital Multimeter MASTECH MS8218
Description: High-accuracy and multifunctional. PC - interface RS 232C. Root-mean-square measuring. (True RMS). Digital display with 50-segmented analog scale. Digit capacity - 50000. Automatic calibration via software.
Digital Multimeter MASTECH MS8221A
Description: Economical class device. Exact measurement accuracy with improved frequency characteristics
Digital Multimeter MASTECH MS8221C
Description: Capacity and temperature measurement. Display illumination. Digit capacity - 1999. Overload indication "1". Automatic shutdown function
Digital Multimeter MASTECH MS8222G
Description: All standard functions and temperature, capacity and frequency measurement. 40-segmental graphic scale. Automatic power-off
Digital Multimeter MASTECH MS8222H
Description: Large function package. 2000 counts. TTL tester. Induction, capacity and frequency maesuring. Illumination. Automatic shutdown.
Digital Multimeter MASTECH MS8226
Description: High-accuracy and multifunctional. Measurement of temperature, pulse ratio , frequency and capacity. Relative measurement mode (REL). Software and PC interface. Overload indication. Illumination. Automatic shutdown.
Digital Multimeter MASTECH MS8264
Description: Capacity, temperature and frequency measurement. Digit capacity - 1999. Self-repair safety device
Digital Multimeter MASTECH MS8265
Description:Large five-digits LCD of digital multimeter Mastech MS8265 distinguishes this measuring device from the other similar tools. The multimeter ensures high measurement accuracy, minimal inaccuracy and conforms to the IEC1010-1 standard CAT III 600V and CAT II 1000V. By means of digital multimeter Mastech MS8265 one can test diodes and identify wires.
Digital Multimeter MASTECH MS8268
Description: High-precision measurement. Digit capacity - 3999. Relative measurement mode (REL). Automatic power off. Self-repair safety device
Digital multimeter MASTECH MY64
Description: FEATURES• 32 Ranges
• Large LCD Display
• Auto power off
• DC voltage: 200m/2/20/200V±0.5%, 1000V±0.8%
• AC voltage: 2/20/200V±0.8%, 700V±1.2%
• DC current: 2m/20mA±0.8%, 200mA±1.5%, 10A±2.0%
• AC current: 2m/20mA±1.0%, 200mA±1.8%, 10A±3.0%
• Resistance: 200/2k/20k/200k/2M?±0.8%, 20M?±1.0%, 200M?±5.0%
• Capacitance: 2n/20n/200n/2µ/20µF±4.0%
• Frequency: 20kHz±1.5%
• Temperature: -20°C ~ 1000°C
• Continuity checking with buzzer
• Diode check: Test current 1.0mA, test voltage 2.8V
• Power: 6F22 (9V) x 1
• hFE: 1 ~ 1000
• Display: 30mm x 60mm LCD
• Size: 91mm x 189mm x 31.5mm
Weight: 0.72 kg
Digital Multimeter MASTECH MY65
Description: Resolution 4 ½ digits LCD. Capacitance and frequency measurment. High input resistance doesn't break measuring of parameters.
Digital Multimeter MASTECH MY68
Description:
Digital Multimeter Pro'sKit MT-1230N
Description: Capacity, frequency measuring. Counts - 3999. Relative measurement mode. Automatic power off.
Digital Multimeter Pro'sKit MT-1232
Description:Digital Multimeter Pro'sKit MT-1232 measures AC/DC current, voltage, resistance, capacity, frequency and tests continuity and diods. Features relative measurement mode, Data Hold and automatic power off.
Weight: 0.35 kg
Boxes and Dongles
English
Deutsch
Currency
