Fujikura FSM 60s Fusion Splicer

The FSm-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30 drop test. The FSm-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on. New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Features

• Rugged construction providing shock, dust and moisture resistance
• Dual monitor position with automatic image orientation
• Automatic arc calibration and iber identiication
• User-selectable iber clamping method sheath clamp or iber holders
• Auto-start tube heater feature
• Color LCD display with anti-relective coating for excellent visibility in bright sunlight
• Simultaneous battery charge and splicer operation
• Long life battery (up to 160 splice/heat cycles per charge)
• Detachable work table incorporated into the transit case
• Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
• Green friendly RoHS & WEEE compliant

Speciications

PARAMETER	VALUE
model	FSm-60S Fusion Splicer
Applicable Fibers	Single-mode (ITU-T G.652), multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter	80mkm to150mkm
Coating Diameter	100mkm to 1,000mkm
Fiber Cleave Length	8 to 16mm with 250mkm coating diameter, 16mm with 900mkm coating diameter
Typical Average Splice Loss	0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
	measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time	Typical 9 seconds with standard single-mode iber
Arc Calibration method	Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing modes	100 preset and user programmable modes
Splice Loss Estimate	Based upon dual camera core alignment data
Storage of Splice Result	Last 2000 results to be stored in the internal memory
Fiber Display	X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
magniication	300X for single X or Y view, or 187X for X and Y view
Viewing method	Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition	0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively
mechanical Proof Test	1.96 to 2.25N
Tube Heater	Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time	Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length	60mm, 40mm, micro
Splice/Heat Cycles with Battery	Typical 160 cycles with power save functions activated
Power Supply	Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals	USB 1.1 (USB-B type) for PC communication. mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection	maximum wind velocity of 15m/s. (34 mph)
Dimensions	136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Weight	2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs) with BTR-08 battery