Mobile Phone Battery Analyzer ADS

The universal analyzer of storage batteries ADS is intended for check, charge/discharge and restore Li-Ion or Ni-MH type of the batteries used in mobile phones. This device has e feature of restoring accumulators with the memory effect. The analyzer ADS can work independently also could be connected to the PC (just in case if there is a need of printing the results from the checking process).

During the check process it is possible to submit a voltage of several discrete levels on the tested battery. For Ni-MH type of batteries these levels make 2.4 V, 3.6 V, 4.8 V and 6.0 V, and for Li-Ion of accumulators - only 3.6 V. Thus capacity of accumulators could be from 400 mAh up to 1500 mAh. The control system of the analyzer ADS provides an opportunity of a choice of any of several modes of operations with the battery: fast check, complete check, restoration, fast charging, slow charging and discharging.

At the end of the checking process the display of an analyzer will show the info about voltage, internal resistor, capacity and duration of charging & discharging. If necessary these data can be transferred to the screen of the PC.

Device requires 13.5V stabilized power from mains adapter, which is included in the package.

Detailed info about the device is available in the manual which is also included in the package.

Features:
• For all kinds shape of battery, no more many type of battery adapter
• Two polarity contact pins of battery tester can vertical and horizontal free direction adjusted to fit any shape of battery
• Testing Li-ion and Ni-MH batteries
• Quick battery testing in 15 seconds for battery's voltage and resistance
• Full testing for measuring up actual battery's capacity, charging/discharging time, resistance, overcharging protection, and testing result printing . There are two Full Testing modes, i.e. the Rapid Full Testing and the Standard Full Testing, the length of time needed for Full Testing depends on the capacity, the higher the capacity, the longer it will take. Under normal circumstances, it takes 2 to 3 hours to run a Rapid Full Test and 4 to 8 hours to run a Standard Full Test.
• Reactivating, it can reactivate a battery when a battery is left unused for a long period of time. It will run a charging and discharging cycle which takes about 5 to 10 hours.
• Fast charging a battery at fast speed
• Slow changing a battery at slow speed
• Discharging a battery
• Polarity reversing switch for easy correcting contact polarity when testing a battery
• Print result, when running full testing,the result can be printed out.(need connect a suitable printer with COM port or connect unit to computer and use normal printer)

Battery Testing Option:
• Li-Ion 3.6V
• Li-Ion Polimer 3.6V
• Ni-MH 2.4V, 3.6V, 4.8V, and 6.0V
• Capacity range for testing: 500mAh --1500mAh (jump by 10mAh)

Package:
• ADS BatAnalyzer battery inspector
• main adapter for battery holding
• software CD for connect BatAnalyzer to computer
• instruction
• RS232 connection cable to connect unit to computer
• AC adapter
• warranty card

Price: email us